Merge pull request #78 from respeaker/pulse
Merge seeed-voicecard pulseaudio settings
This commit is contained in:
Baozhu Zuo
GitHub
commit
3d56af9d3c
9 changed files with 757 additions and 0 deletions
229
pulseaudio/README.md
Normal file
229
pulseaudio/README.md
Normal file
|
|
@ -0,0 +1,229 @@
|
||||||
|
# PulseAudio Configuration for seeed-voicecard
|
||||||
|
|
||||||
|
Following this guide if you want to use your seeed-voicecard as a default source/sink of pulseaudio.
|
||||||
|
|
||||||
|
### ReSpeaker 4 Mic Array
|
||||||
|
|
||||||
|
|
||||||
|
1. Download pulseaudio
|
||||||
|
```
|
||||||
|
sudo apt install pulseaudio
|
||||||
|
```
|
||||||
|
|
||||||
|
2. First, you need to write [a profile for pulse](https://www.freedesktop.org/wiki/Software/PulseAudio/Backends/ALSA/Profiles/)
|
||||||
|
```
|
||||||
|
cd seeed-voicecard
|
||||||
|
cd pulseaudio
|
||||||
|
cd pulse_config_4mic
|
||||||
|
sudo cp seeed-voicecard.conf /usr/share/pulseaudio/alsa-mixer/profile-sets/
|
||||||
|
```
|
||||||
|
|
||||||
|
3. Edit `udev rules`
|
||||||
|
|
||||||
|
During the system start, when the card "seeed4micvoicec" is detected, the PULSE_PROFILE_SET variable will be set in the udev database, and PulseAudio will be forced to use `seeed-voicecard.conf`.
|
||||||
|
|
||||||
|
```
|
||||||
|
# have a look at /lib/udev/rules.d/90-pulseaudio.rules
|
||||||
|
sudo vim /lib/udev/rules.d/90-pulseaudio.rules
|
||||||
|
# add the following lines at about line 87(behind the setting for some laptops and before the line GOTO="pulseaudio_end")
|
||||||
|
# Seeed Voicecard
|
||||||
|
ATTR{id}=="seeed4micvoicec",ATTR{number}=="1",ENV{PULSE_PROFILE_SET}="seeed-voicecard.conf"
|
||||||
|
```
|
||||||
|
|
||||||
|
|
||||||
|
The value of `ATTR{number}` can be found with:
|
||||||
|
|
||||||
|
```
|
||||||
|
udevadm info -a -p /sys/class/sound/card0/
|
||||||
|
# or udevadm info -a -p /sys/class/sound/card1/
|
||||||
|
```
|
||||||
|
|
||||||
|
For example, in Raspberry Pi, we can find `ATTR{id}=="seeed4micvoicec"` and `ATTR{number}=="1"` with command `udevadm info -a -p /sys/class/sound/card1/`:
|
||||||
|
|
||||||
|
```
|
||||||
|
pi@raspberrypi:~ $ udevadm info -a -p /sys/class/sound/card1/
|
||||||
|
|
||||||
|
Udevadm info starts with the device specified by the devpath and then
|
||||||
|
walks up the chain of parent devices. It prints for every device
|
||||||
|
found, all possible attributes in the udev rules key format.
|
||||||
|
A rule to match, can be composed by the attributes of the device
|
||||||
|
and the attributes from one single parent device.
|
||||||
|
|
||||||
|
looking at device '/devices/platform/soc/soc:sound/sound/card1':
|
||||||
|
KERNEL=="card1"
|
||||||
|
SUBSYSTEM=="sound"
|
||||||
|
DRIVER==""
|
||||||
|
ATTR{id}=="seeed4micvoicec"
|
||||||
|
ATTR{number}=="1"
|
||||||
|
|
||||||
|
looking at parent device '/devices/platform/soc/soc:sound':
|
||||||
|
KERNELS=="soc:sound"
|
||||||
|
SUBSYSTEMS=="platform"
|
||||||
|
DRIVERS=="seeed-voicecard"
|
||||||
|
ATTRS{driver_override}=="(null)"
|
||||||
|
|
||||||
|
looking at parent device '/devices/platform/soc':
|
||||||
|
KERNELS=="soc"
|
||||||
|
SUBSYSTEMS=="platform"
|
||||||
|
DRIVERS==""
|
||||||
|
ATTRS{driver_override}=="(null)"
|
||||||
|
|
||||||
|
looking at parent device '/devices/platform':
|
||||||
|
KERNELS=="platform"
|
||||||
|
SUBSYSTEMS==""
|
||||||
|
DRIVERS==""
|
||||||
|
```
|
||||||
|
|
||||||
|
4. config `default.pa` and `daemon.conf`
|
||||||
|
```
|
||||||
|
sudo cp default.pa /etc/pulse/
|
||||||
|
sudo cp daemon.conf /etc/pulse/
|
||||||
|
```
|
||||||
|
|
||||||
|
5. reboot raspberry pi and check
|
||||||
|
```
|
||||||
|
sudo reboot
|
||||||
|
pulseaudio --start # start pulse at first
|
||||||
|
pactl info # check the setting
|
||||||
|
|
||||||
|
Server String: /run/user/1000/pulse/native
|
||||||
|
Library Protocol Version: 32
|
||||||
|
Server Protocol Version: 32
|
||||||
|
Is Local: yes
|
||||||
|
Client Index: 18
|
||||||
|
Tile Size: 65496
|
||||||
|
User Name: pi
|
||||||
|
Host Name: raspberrypi
|
||||||
|
Server Name: pulseaudio
|
||||||
|
Server Version: 10.0
|
||||||
|
Default Sample Specification: s16le 4ch 96000Hz
|
||||||
|
Default Channel Map: front-left,front-center,front-right,rear-center
|
||||||
|
Default Sink: alsa_output.platform-soc_audio.analog-stereo
|
||||||
|
Default Source: alsa_input.platform-soc_sound.seeed-source
|
||||||
|
Cookie: 3b12:70b3
|
||||||
|
```
|
||||||
|
|
||||||
|
### 6-Mics Circular Array Kit and 4-Mics Linear Array
|
||||||
|
|
||||||
|
|
||||||
|
1. Download pulseaudio
|
||||||
|
```
|
||||||
|
sudo apt install pulseaudio
|
||||||
|
```
|
||||||
|
|
||||||
|
2. First, you need to write [a profile for pulse](https://www.freedesktop.org/wiki/Software/PulseAudio/Backends/ALSA/Profiles/)
|
||||||
|
```
|
||||||
|
cd seeed-voicecard
|
||||||
|
cd pulseaudio
|
||||||
|
cd pulse_config_6mic
|
||||||
|
sudo cp seeed-voicecard.conf /usr/share/pulseaudio/alsa-mixer/profile-sets/
|
||||||
|
```
|
||||||
|
|
||||||
|
3. Edit `udev rules`
|
||||||
|
|
||||||
|
During the system start, when the card "seeed8micvoicec" is detected, the PULSE_PROFILE_SET variable will be set in the udev database, and PulseAudio will be forced to use `seeed-voicecard.conf`.
|
||||||
|
|
||||||
|
```
|
||||||
|
# have a look at /lib/udev/rules.d/90-pulseaudio.rules
|
||||||
|
sudo vim /lib/udev/rules.d/90-pulseaudio.rules
|
||||||
|
# add the following lines at about line 87(behind the setting for some laptops and before the line GOTO="pulseaudio_end")
|
||||||
|
# Seeed Voicecard
|
||||||
|
ATTR{id}=="seeed8micvoicec",ATTR{number}=="1",ENV{PULSE_PROFILE_SET}="seeed-voicecard.conf"
|
||||||
|
```
|
||||||
|
|
||||||
|
|
||||||
|
The value of `ATTR{number}` can be found with:
|
||||||
|
|
||||||
|
```
|
||||||
|
udevadm info -a -p /sys/class/sound/card0/
|
||||||
|
# or udevadm info -a -p /sys/class/sound/card1/
|
||||||
|
```
|
||||||
|
|
||||||
|
For example, in Raspberry Pi, we can find `ATTR{id}=="seeed8micvoicec"` and `ATTR{number}=="1"` with command `udevadm info -a -p /sys/class/sound/card1/`:
|
||||||
|
|
||||||
|
```
|
||||||
|
pi@raspberrypi:~ $ udevadm info -a -p /sys/class/sound/card1/
|
||||||
|
|
||||||
|
Udevadm info starts with the device specified by the devpath and then
|
||||||
|
walks up the chain of parent devices. It prints for every device
|
||||||
|
found, all possible attributes in the udev rules key format.
|
||||||
|
A rule to match, can be composed by the attributes of the device
|
||||||
|
and the attributes from one single parent device.
|
||||||
|
|
||||||
|
looking at device '/devices/platform/soc/soc:sound/sound/card1':
|
||||||
|
KERNEL=="card1"
|
||||||
|
SUBSYSTEM=="sound"
|
||||||
|
DRIVER==""
|
||||||
|
ATTR{id}=="seeed8micvoicec"
|
||||||
|
ATTR{number}=="1"
|
||||||
|
|
||||||
|
looking at parent device '/devices/platform/soc/soc:sound':
|
||||||
|
KERNELS=="soc:sound"
|
||||||
|
SUBSYSTEMS=="platform"
|
||||||
|
DRIVERS=="seeed-voicecard"
|
||||||
|
ATTRS{driver_override}=="(null)"
|
||||||
|
|
||||||
|
looking at parent device '/devices/platform/soc':
|
||||||
|
KERNELS=="soc"
|
||||||
|
SUBSYSTEMS=="platform"
|
||||||
|
DRIVERS==""
|
||||||
|
ATTRS{driver_override}=="(null)"
|
||||||
|
|
||||||
|
looking at parent device '/devices/platform':
|
||||||
|
KERNELS=="platform"
|
||||||
|
SUBSYSTEMS==""
|
||||||
|
DRIVERS==""
|
||||||
|
```
|
||||||
|
|
||||||
|
4. config `default.pa` and `daemon.conf`
|
||||||
|
```
|
||||||
|
sudo cp default.pa /etc/pulse/
|
||||||
|
sudo cp daemon.conf /etc/pulse/
|
||||||
|
```
|
||||||
|
|
||||||
|
5. reboot raspberry pi and check
|
||||||
|
```
|
||||||
|
sudo reboot
|
||||||
|
pulseaudio --start # start pulse at first
|
||||||
|
pactl info # check the setting
|
||||||
|
|
||||||
|
# The output should be like this
|
||||||
|
# You could see the default sink is seeed-2ch and default source is seeed-8ch
|
||||||
|
pi@raspberrypi:~ $ pactl info
|
||||||
|
Server String: /run/user/1000/pulse/native
|
||||||
|
Library Protocol Version: 32
|
||||||
|
Server Protocol Version: 32
|
||||||
|
Is Local: yes
|
||||||
|
Client Index: 6
|
||||||
|
Tile Size: 65496
|
||||||
|
User Name: pi
|
||||||
|
Host Name: raspberrypi
|
||||||
|
Server Name: pulseaudio
|
||||||
|
Server Version: 10.0
|
||||||
|
Default Sample Specification: s32le 8ch 96000Hz
|
||||||
|
Default Channel Map: front-left,front-left-of-center,front-center,front-right,front-right-of-center,rear-center,aux0,aux1
|
||||||
|
Default Sink: alsa_output.platform-soc_sound.seeed-2ch
|
||||||
|
Default Source: alsa_input.platform-soc_sound.seeed-8ch
|
||||||
|
Cookie: 3523:e5af
|
||||||
|
```
|
||||||
|
|
||||||
|
### FAQ
|
||||||
|
|
||||||
|
1. Default Sink/Source not right
|
||||||
|
|
||||||
|
Make sure there is no any other daemon or using the audio device. Then check profile and udev rules.
|
||||||
|
|
||||||
|
`pacmd list-sinks` and `pacmd list-sources` can be used to show the avaiable sinks/sources, after pulseaudio is started.
|
||||||
|
|
||||||
|
2. Can't start PulseAudio
|
||||||
|
|
||||||
|
Check `default.pa` and `daemon.conf`
|
||||||
|
|
||||||
|
3. How to get PulseAudio started automatically
|
||||||
|
|
||||||
|
Normally the PulseAudio server is started automatically. If you want to disable it, you can set `autospawn = no` in `~/.config/pulse/client.conf` or `/etc/pulse/client.conf`.
|
||||||
|
[Click this for more details](https://www.freedesktop.org/wiki/Software/PulseAudio/Documentation/User/Running/).
|
||||||
|
|
||||||
|
4. Why the default sample rate is 96000? What if my audio's sample rate is not the same as the default?
|
||||||
|
|
||||||
|
For the other sample rate audio, PulseAudio will resample it into 96K, which means that if your audio's sample rate is lower than 96K, it will get smoothing.
|
||||||
87
pulseaudio/pulse_config_4mic/daemon.conf
Normal file
87
pulseaudio/pulse_config_4mic/daemon.conf
Normal file
|
|
@ -0,0 +1,87 @@
|
||||||
|
# This file is part of PulseAudio.
|
||||||
|
#
|
||||||
|
# PulseAudio is free software; you can redistribute it and/or modify
|
||||||
|
# it under the terms of the GNU Lesser General Public License as published by
|
||||||
|
# the Free Software Foundation; either version 2 of the License, or
|
||||||
|
# (at your option) any later version.
|
||||||
|
#
|
||||||
|
# PulseAudio is distributed in the hope that it will be useful, but
|
||||||
|
# WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||||
|
# General Public License for more details.
|
||||||
|
#
|
||||||
|
# You should have received a copy of the GNU Lesser General Public License
|
||||||
|
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
|
||||||
|
|
||||||
|
## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
|
||||||
|
## more information. Default values are commented out. Use either ; or # for
|
||||||
|
## commenting.
|
||||||
|
|
||||||
|
; daemonize = no
|
||||||
|
; fail = yes
|
||||||
|
; allow-module-loading = yes
|
||||||
|
; allow-exit = yes
|
||||||
|
; use-pid-file = yes
|
||||||
|
; system-instance = no
|
||||||
|
; local-server-type = user
|
||||||
|
; enable-shm = yes
|
||||||
|
; enable-memfd = yes
|
||||||
|
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
|
||||||
|
; lock-memory = no
|
||||||
|
; cpu-limit = no
|
||||||
|
|
||||||
|
; high-priority = yes
|
||||||
|
; nice-level = -11
|
||||||
|
|
||||||
|
; realtime-scheduling = yes
|
||||||
|
; realtime-priority = 5
|
||||||
|
|
||||||
|
; exit-idle-time = 20
|
||||||
|
; scache-idle-time = 20
|
||||||
|
|
||||||
|
; dl-search-path = (depends on architecture)
|
||||||
|
|
||||||
|
; load-default-script-file = yes
|
||||||
|
; default-script-file = /etc/pulse/default.pa
|
||||||
|
|
||||||
|
; log-target = auto
|
||||||
|
; log-level = notice
|
||||||
|
; log-meta = no
|
||||||
|
; log-time = no
|
||||||
|
; log-backtrace = 0
|
||||||
|
|
||||||
|
; resample-method = speex-float-1
|
||||||
|
; enable-remixing = yes
|
||||||
|
; enable-lfe-remixing = no
|
||||||
|
; lfe-crossover-freq = 0
|
||||||
|
|
||||||
|
; flat-volumes = yes
|
||||||
|
|
||||||
|
; rlimit-fsize = -1
|
||||||
|
; rlimit-data = -1
|
||||||
|
; rlimit-stack = -1
|
||||||
|
; rlimit-core = -1
|
||||||
|
; rlimit-as = -1
|
||||||
|
; rlimit-rss = -1
|
||||||
|
; rlimit-nproc = -1
|
||||||
|
; rlimit-nofile = 256
|
||||||
|
; rlimit-memlock = -1
|
||||||
|
; rlimit-locks = -1
|
||||||
|
; rlimit-sigpending = -1
|
||||||
|
; rlimit-msgqueue = -1
|
||||||
|
; rlimit-nice = 31
|
||||||
|
; rlimit-rtprio = 9
|
||||||
|
; rlimit-rttime = 200000
|
||||||
|
|
||||||
|
default-sample-format = s16le
|
||||||
|
default-sample-rate = 96000
|
||||||
|
; alternate-sample-rate = 48000
|
||||||
|
default-sample-channels = 4
|
||||||
|
; default-channel-map = front-left,front-right
|
||||||
|
|
||||||
|
; default-fragments = 4
|
||||||
|
; default-fragment-size-msec = 25
|
||||||
|
|
||||||
|
; enable-deferred-volume = yes
|
||||||
|
; deferred-volume-safety-margin-usec = 8000
|
||||||
|
; deferred-volume-extra-delay-usec = 0
|
||||||
144
pulseaudio/pulse_config_4mic/default.pa
Normal file
144
pulseaudio/pulse_config_4mic/default.pa
Normal file
|
|
@ -0,0 +1,144 @@
|
||||||
|
#!/usr/bin/pulseaudio -nF
|
||||||
|
#
|
||||||
|
# This file is part of PulseAudio.
|
||||||
|
#
|
||||||
|
# PulseAudio is free software; you can redistribute it and/or modify it
|
||||||
|
# under the terms of the GNU Lesser General Public License as published by
|
||||||
|
# the Free Software Foundation; either version 2 of the License, or
|
||||||
|
# (at your option) any later version.
|
||||||
|
#
|
||||||
|
# PulseAudio is distributed in the hope that it will be useful, but
|
||||||
|
# WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||||
|
# General Public License for more details.
|
||||||
|
#
|
||||||
|
# You should have received a copy of the GNU Lesser General Public License
|
||||||
|
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
|
||||||
|
|
||||||
|
# This startup script is used only if PulseAudio is started per-user
|
||||||
|
# (i.e. not in system mode)
|
||||||
|
|
||||||
|
.fail
|
||||||
|
|
||||||
|
### Automatically restore the volume of streams and devices
|
||||||
|
load-module module-device-restore
|
||||||
|
load-module module-stream-restore
|
||||||
|
load-module module-card-restore
|
||||||
|
|
||||||
|
### Automatically augment property information from .desktop files
|
||||||
|
### stored in /usr/share/application
|
||||||
|
load-module module-augment-properties
|
||||||
|
|
||||||
|
### Should be after module-*-restore but before module-*-detect
|
||||||
|
load-module module-switch-on-port-available
|
||||||
|
|
||||||
|
### Load audio drivers statically
|
||||||
|
### (it's probably better to not load these drivers manually, but instead
|
||||||
|
### use module-udev-detect -- see below -- for doing this automatically)
|
||||||
|
#load-module module-alsa-sink device="hw:1,0" channels=8 rate=48000 format=s32le
|
||||||
|
#load-module module-alsa-source device="hw:1,0" channels=8 rate=48000 format=s32le
|
||||||
|
#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
|
||||||
|
#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
|
||||||
|
#load-module module-null-sink
|
||||||
|
#load-module module-pipe-sink
|
||||||
|
|
||||||
|
### Automatically load driver modules depending on the hardware available
|
||||||
|
.ifexists module-udev-detect.so
|
||||||
|
load-module module-udev-detect
|
||||||
|
#channels=8 rate=48000 format=s32le
|
||||||
|
.else
|
||||||
|
### Use the static hardware detection module (for systems that lack udev support)
|
||||||
|
load-module module-detect
|
||||||
|
.endif
|
||||||
|
|
||||||
|
### Automatically connect sink and source if JACK server is present
|
||||||
|
.ifexists module-jackdbus-detect.so
|
||||||
|
.nofail
|
||||||
|
load-module module-jackdbus-detect channels=2
|
||||||
|
.fail
|
||||||
|
.endif
|
||||||
|
|
||||||
|
### Automatically load driver modules for Bluetooth hardware
|
||||||
|
.ifexists module-bluetooth-policy.so
|
||||||
|
load-module module-bluetooth-policy
|
||||||
|
.endif
|
||||||
|
|
||||||
|
.ifexists module-bluetooth-discover.so
|
||||||
|
load-module module-bluetooth-discover
|
||||||
|
.endif
|
||||||
|
|
||||||
|
### Load several protocols
|
||||||
|
.ifexists module-esound-protocol-unix.so
|
||||||
|
load-module module-esound-protocol-unix
|
||||||
|
.endif
|
||||||
|
load-module module-native-protocol-unix
|
||||||
|
|
||||||
|
### Network access (may be configured with paprefs, so leave this commented
|
||||||
|
### here if you plan to use paprefs)
|
||||||
|
#load-module module-esound-protocol-tcp
|
||||||
|
#load-module module-native-protocol-tcp
|
||||||
|
#load-module module-zeroconf-publish
|
||||||
|
|
||||||
|
### Load the RTP receiver module (also configured via paprefs, see above)
|
||||||
|
#load-module module-rtp-recv
|
||||||
|
|
||||||
|
### Load the RTP sender module (also configured via paprefs, see above)
|
||||||
|
#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
|
||||||
|
#load-module module-rtp-send source=rtp.monitor
|
||||||
|
|
||||||
|
### Load additional modules from GConf settings. This can be configured with the paprefs tool.
|
||||||
|
### Please keep in mind that the modules configured by paprefs might conflict with manually
|
||||||
|
### loaded modules.
|
||||||
|
.ifexists module-gconf.so
|
||||||
|
.nofail
|
||||||
|
load-module module-gconf
|
||||||
|
.fail
|
||||||
|
.endif
|
||||||
|
|
||||||
|
### Automatically restore the default sink/source when changed by the user
|
||||||
|
### during runtime
|
||||||
|
### NOTE: This should be loaded as early as possible so that subsequent modules
|
||||||
|
### that look up the default sink/source get the right value
|
||||||
|
load-module module-default-device-restore
|
||||||
|
|
||||||
|
### Automatically move streams to the default sink if the sink they are
|
||||||
|
### connected to dies, similar for sources
|
||||||
|
load-module module-rescue-streams
|
||||||
|
|
||||||
|
### Make sure we always have a sink around, even if it is a null sink.
|
||||||
|
load-module module-always-sink
|
||||||
|
|
||||||
|
### Honour intended role device property
|
||||||
|
load-module module-intended-roles
|
||||||
|
|
||||||
|
### Automatically suspend sinks/sources that become idle for too long
|
||||||
|
load-module module-suspend-on-idle
|
||||||
|
|
||||||
|
### If autoexit on idle is enabled we want to make sure we only quit
|
||||||
|
### when no local session needs us anymore.
|
||||||
|
.ifexists module-console-kit.so
|
||||||
|
load-module module-console-kit
|
||||||
|
.endif
|
||||||
|
.ifexists module-systemd-login.so
|
||||||
|
load-module module-systemd-login
|
||||||
|
.endif
|
||||||
|
|
||||||
|
### Enable positioned event sounds
|
||||||
|
load-module module-position-event-sounds
|
||||||
|
|
||||||
|
### Cork music/video streams when a phone stream is active
|
||||||
|
load-module module-role-cork
|
||||||
|
|
||||||
|
### Modules to allow autoloading of filters (such as echo cancellation)
|
||||||
|
### on demand. module-filter-heuristics tries to determine what filters
|
||||||
|
### make sense, and module-filter-apply does the heavy-lifting of
|
||||||
|
### loading modules and rerouting streams.
|
||||||
|
load-module module-filter-heuristics
|
||||||
|
load-module module-filter-apply
|
||||||
|
|
||||||
|
### Make some devices default
|
||||||
|
#set-default-sink output
|
||||||
|
#set-default-source input
|
||||||
|
set-default-source alsa_input.platform-soc_sound.seeed-source
|
||||||
|
set-default-sink alsa_output.platform-soc_sound.seeed-sink
|
||||||
|
|
||||||
33
pulseaudio/pulse_config_4mic/seeed-voicecard.conf
Normal file
33
pulseaudio/pulse_config_4mic/seeed-voicecard.conf
Normal file
|
|
@ -0,0 +1,33 @@
|
||||||
|
# /usr/share/pulseaudio/alsa-mixer/profile-sets/seeed-voicecard.conf
|
||||||
|
|
||||||
|
[General]
|
||||||
|
auto-profiles = no
|
||||||
|
[Mapping seeed-source]
|
||||||
|
device-strings = ac108
|
||||||
|
channel-map = front-left,front-right,rear-left,rear-right
|
||||||
|
exact-channels = false
|
||||||
|
fallback = yes
|
||||||
|
paths-input = seeed-source
|
||||||
|
priority = 3
|
||||||
|
direction = input
|
||||||
|
[Mapping seeed-sink]
|
||||||
|
device-strings = playback
|
||||||
|
channel-map = front-left,front-right
|
||||||
|
exact-channels = false
|
||||||
|
fallback = yes
|
||||||
|
paths-output = seeed-sink
|
||||||
|
direction = output
|
||||||
|
priority = 2
|
||||||
|
[Profile output:seeed-sink+input:seeed-source]
|
||||||
|
output-mappings = seeed-sink
|
||||||
|
input-mappings = seeed-source
|
||||||
|
priority = 100
|
||||||
|
skip-probe = yes
|
||||||
|
[Profile output:seeed-sink]
|
||||||
|
output-mappings = seeed-sink
|
||||||
|
priority = 4
|
||||||
|
skip-probe = yes
|
||||||
|
[Profile input:seeed-source]
|
||||||
|
input-mappings = seeed-source
|
||||||
|
priority = 5
|
||||||
|
skip-probe = yes
|
||||||
87
pulseaudio/pulse_config_6mic/daemon.conf
Normal file
87
pulseaudio/pulse_config_6mic/daemon.conf
Normal file
|
|
@ -0,0 +1,87 @@
|
||||||
|
# This file is part of PulseAudio.
|
||||||
|
#
|
||||||
|
# PulseAudio is free software; you can redistribute it and/or modify
|
||||||
|
# it under the terms of the GNU Lesser General Public License as published by
|
||||||
|
# the Free Software Foundation; either version 2 of the License, or
|
||||||
|
# (at your option) any later version.
|
||||||
|
#
|
||||||
|
# PulseAudio is distributed in the hope that it will be useful, but
|
||||||
|
# WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||||
|
# General Public License for more details.
|
||||||
|
#
|
||||||
|
# You should have received a copy of the GNU Lesser General Public License
|
||||||
|
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
|
||||||
|
|
||||||
|
## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
|
||||||
|
## more information. Default values are commented out. Use either ; or # for
|
||||||
|
## commenting.
|
||||||
|
|
||||||
|
; daemonize = no
|
||||||
|
; fail = yes
|
||||||
|
; allow-module-loading = yes
|
||||||
|
; allow-exit = yes
|
||||||
|
; use-pid-file = yes
|
||||||
|
; system-instance = no
|
||||||
|
; local-server-type = user
|
||||||
|
; enable-shm = yes
|
||||||
|
; enable-memfd = yes
|
||||||
|
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
|
||||||
|
; lock-memory = no
|
||||||
|
; cpu-limit = no
|
||||||
|
|
||||||
|
; high-priority = yes
|
||||||
|
; nice-level = -11
|
||||||
|
|
||||||
|
; realtime-scheduling = yes
|
||||||
|
; realtime-priority = 5
|
||||||
|
|
||||||
|
; exit-idle-time = 20
|
||||||
|
; scache-idle-time = 20
|
||||||
|
|
||||||
|
; dl-search-path = (depends on architecture)
|
||||||
|
|
||||||
|
; load-default-script-file = yes
|
||||||
|
; default-script-file = /etc/pulse/default.pa
|
||||||
|
|
||||||
|
; log-target = auto
|
||||||
|
; log-level = notice
|
||||||
|
; log-meta = no
|
||||||
|
; log-time = no
|
||||||
|
; log-backtrace = 0
|
||||||
|
|
||||||
|
; resample-method = speex-float-1
|
||||||
|
; enable-remixing = yes
|
||||||
|
; enable-lfe-remixing = no
|
||||||
|
; lfe-crossover-freq = 0
|
||||||
|
|
||||||
|
; flat-volumes = yes
|
||||||
|
|
||||||
|
; rlimit-fsize = -1
|
||||||
|
; rlimit-data = -1
|
||||||
|
; rlimit-stack = -1
|
||||||
|
; rlimit-core = -1
|
||||||
|
; rlimit-as = -1
|
||||||
|
; rlimit-rss = -1
|
||||||
|
; rlimit-nproc = -1
|
||||||
|
; rlimit-nofile = 256
|
||||||
|
; rlimit-memlock = -1
|
||||||
|
; rlimit-locks = -1
|
||||||
|
; rlimit-sigpending = -1
|
||||||
|
; rlimit-msgqueue = -1
|
||||||
|
; rlimit-nice = 31
|
||||||
|
; rlimit-rtprio = 9
|
||||||
|
; rlimit-rttime = 200000
|
||||||
|
|
||||||
|
default-sample-format = s32le
|
||||||
|
default-sample-rate = 96000
|
||||||
|
; alternate-sample-rate = 48000
|
||||||
|
default-sample-channels = 8
|
||||||
|
; default-channel-map = front-left,front-right
|
||||||
|
|
||||||
|
; default-fragments = 4
|
||||||
|
; default-fragment-size-msec = 25
|
||||||
|
|
||||||
|
; enable-deferred-volume = yes
|
||||||
|
; deferred-volume-safety-margin-usec = 8000
|
||||||
|
; deferred-volume-extra-delay-usec = 0
|
||||||
143
pulseaudio/pulse_config_6mic/default.pa
Normal file
143
pulseaudio/pulse_config_6mic/default.pa
Normal file
|
|
@ -0,0 +1,143 @@
|
||||||
|
#!/usr/bin/pulseaudio -nF
|
||||||
|
#
|
||||||
|
# This file is part of PulseAudio.
|
||||||
|
#
|
||||||
|
# PulseAudio is free software; you can redistribute it and/or modify it
|
||||||
|
# under the terms of the GNU Lesser General Public License as published by
|
||||||
|
# the Free Software Foundation; either version 2 of the License, or
|
||||||
|
# (at your option) any later version.
|
||||||
|
#
|
||||||
|
# PulseAudio is distributed in the hope that it will be useful, but
|
||||||
|
# WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||||
|
# General Public License for more details.
|
||||||
|
#
|
||||||
|
# You should have received a copy of the GNU Lesser General Public License
|
||||||
|
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
|
||||||
|
|
||||||
|
# This startup script is used only if PulseAudio is started per-user
|
||||||
|
# (i.e. not in system mode)
|
||||||
|
|
||||||
|
.fail
|
||||||
|
|
||||||
|
### Automatically restore the volume of streams and devices
|
||||||
|
load-module module-device-restore
|
||||||
|
load-module module-stream-restore
|
||||||
|
load-module module-card-restore
|
||||||
|
|
||||||
|
### Automatically augment property information from .desktop files
|
||||||
|
### stored in /usr/share/application
|
||||||
|
load-module module-augment-properties
|
||||||
|
|
||||||
|
### Should be after module-*-restore but before module-*-detect
|
||||||
|
load-module module-switch-on-port-available
|
||||||
|
|
||||||
|
### Load audio drivers statically
|
||||||
|
### (it's probably better to not load these drivers manually, but instead
|
||||||
|
### use module-udev-detect -- see below -- for doing this automatically)
|
||||||
|
#load-module module-alsa-sink device="hw:1,0" channels=8 rate=48000 format=s32le
|
||||||
|
#load-module module-alsa-source device="hw:1,0" channels=8 rate=48000 format=s32le
|
||||||
|
#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
|
||||||
|
#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
|
||||||
|
#load-module module-null-sink
|
||||||
|
#load-module module-pipe-sink
|
||||||
|
|
||||||
|
### Automatically load driver modules depending on the hardware available
|
||||||
|
.ifexists module-udev-detect.so
|
||||||
|
load-module module-udev-detect
|
||||||
|
#channels=8 rate=48000 format=s32le
|
||||||
|
.else
|
||||||
|
### Use the static hardware detection module (for systems that lack udev support)
|
||||||
|
load-module module-detect
|
||||||
|
.endif
|
||||||
|
|
||||||
|
### Automatically connect sink and source if JACK server is present
|
||||||
|
.ifexists module-jackdbus-detect.so
|
||||||
|
.nofail
|
||||||
|
load-module module-jackdbus-detect channels=2
|
||||||
|
.fail
|
||||||
|
.endif
|
||||||
|
|
||||||
|
### Automatically load driver modules for Bluetooth hardware
|
||||||
|
.ifexists module-bluetooth-policy.so
|
||||||
|
load-module module-bluetooth-policy
|
||||||
|
.endif
|
||||||
|
|
||||||
|
.ifexists module-bluetooth-discover.so
|
||||||
|
load-module module-bluetooth-discover
|
||||||
|
.endif
|
||||||
|
|
||||||
|
### Load several protocols
|
||||||
|
.ifexists module-esound-protocol-unix.so
|
||||||
|
load-module module-esound-protocol-unix
|
||||||
|
.endif
|
||||||
|
load-module module-native-protocol-unix
|
||||||
|
|
||||||
|
### Network access (may be configured with paprefs, so leave this commented
|
||||||
|
### here if you plan to use paprefs)
|
||||||
|
#load-module module-esound-protocol-tcp
|
||||||
|
#load-module module-native-protocol-tcp
|
||||||
|
#load-module module-zeroconf-publish
|
||||||
|
|
||||||
|
### Load the RTP receiver module (also configured via paprefs, see above)
|
||||||
|
#load-module module-rtp-recv
|
||||||
|
|
||||||
|
### Load the RTP sender module (also configured via paprefs, see above)
|
||||||
|
#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
|
||||||
|
#load-module module-rtp-send source=rtp.monitor
|
||||||
|
|
||||||
|
### Load additional modules from GConf settings. This can be configured with the paprefs tool.
|
||||||
|
### Please keep in mind that the modules configured by paprefs might conflict with manually
|
||||||
|
### loaded modules.
|
||||||
|
.ifexists module-gconf.so
|
||||||
|
.nofail
|
||||||
|
load-module module-gconf
|
||||||
|
.fail
|
||||||
|
.endif
|
||||||
|
|
||||||
|
### Automatically restore the default sink/source when changed by the user
|
||||||
|
### during runtime
|
||||||
|
### NOTE: This should be loaded as early as possible so that subsequent modules
|
||||||
|
### that look up the default sink/source get the right value
|
||||||
|
load-module module-default-device-restore
|
||||||
|
|
||||||
|
### Automatically move streams to the default sink if the sink they are
|
||||||
|
### connected to dies, similar for sources
|
||||||
|
load-module module-rescue-streams
|
||||||
|
|
||||||
|
### Make sure we always have a sink around, even if it is a null sink.
|
||||||
|
load-module module-always-sink
|
||||||
|
|
||||||
|
### Honour intended role device property
|
||||||
|
load-module module-intended-roles
|
||||||
|
|
||||||
|
### Automatically suspend sinks/sources that become idle for too long
|
||||||
|
load-module module-suspend-on-idle
|
||||||
|
|
||||||
|
### If autoexit on idle is enabled we want to make sure we only quit
|
||||||
|
### when no local session needs us anymore.
|
||||||
|
.ifexists module-console-kit.so
|
||||||
|
load-module module-console-kit
|
||||||
|
.endif
|
||||||
|
.ifexists module-systemd-login.so
|
||||||
|
load-module module-systemd-login
|
||||||
|
.endif
|
||||||
|
|
||||||
|
### Enable positioned event sounds
|
||||||
|
load-module module-position-event-sounds
|
||||||
|
|
||||||
|
### Cork music/video streams when a phone stream is active
|
||||||
|
load-module module-role-cork
|
||||||
|
|
||||||
|
### Modules to allow autoloading of filters (such as echo cancellation)
|
||||||
|
### on demand. module-filter-heuristics tries to determine what filters
|
||||||
|
### make sense, and module-filter-apply does the heavy-lifting of
|
||||||
|
### loading modules and rerouting streams.
|
||||||
|
load-module module-filter-heuristics
|
||||||
|
load-module module-filter-apply
|
||||||
|
|
||||||
|
### Make some devices default
|
||||||
|
#set-default-sink output
|
||||||
|
#set-default-source input
|
||||||
|
set-default-source alsa_input.platform-soc_sound.seeed-8ch
|
||||||
|
set-default-sink alsa_output.platform-soc_sound.seeed-2ch
|
||||||
34
pulseaudio/pulse_config_6mic/seeed-voicecard.conf
Normal file
34
pulseaudio/pulse_config_6mic/seeed-voicecard.conf
Normal file
|
|
@ -0,0 +1,34 @@
|
||||||
|
# /usr/share/pulseaudio/alsa-mixer/profile-sets/seeed-voiced.conf
|
||||||
|
|
||||||
|
[General]
|
||||||
|
auto-profiles = no
|
||||||
|
[Mapping seeed-8ch]
|
||||||
|
device-strings = hw:1,0
|
||||||
|
channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
|
||||||
|
exact-channels = false
|
||||||
|
fallback = yes
|
||||||
|
paths-input = seeed-8ch
|
||||||
|
priority = 3
|
||||||
|
direction = input
|
||||||
|
[Mapping seeed-2ch]
|
||||||
|
device-strings = hw:1,0
|
||||||
|
channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
|
||||||
|
exact-channels = false
|
||||||
|
exact-channels = false
|
||||||
|
fallback = yes
|
||||||
|
paths-output = seeed-2ch
|
||||||
|
direction = output
|
||||||
|
priority = 2
|
||||||
|
[Profile output:seeed-2ch+input:seeed-8ch]
|
||||||
|
output-mappings = seeed-2ch
|
||||||
|
input-mappings = seeed-8ch
|
||||||
|
priority = 100
|
||||||
|
skip-probe = yes
|
||||||
|
[Profile output:seeed-2ch]
|
||||||
|
output-mappings = seeed-2ch
|
||||||
|
priority = 4
|
||||||
|
skip-probe = yes
|
||||||
|
[Profile input:seeed-8ch]
|
||||||
|
input-mappings = seeed-8ch
|
||||||
|
priority = 5
|
||||||
|
skip-probe = yes
|
||||||
BIN
pulseaudio/udev_rules_4mic.png
Normal file
BIN
pulseaudio/udev_rules_4mic.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 192 KiB |
BIN
pulseaudio/udev_rules_6mic.png
Normal file
BIN
pulseaudio/udev_rules_6mic.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 483 KiB |
Loading…
Reference in a new issue