seeed-voicecard

While the upstream wm8960 codec is not currently supported by current Pi kernel builds, upstream wm8960 has some bugs, we had fixed it. we must it build manually.

We also write ac108 rapberry pi linux kernel driver.

Get the seeed voice card source code.

git clone https://github.com/respeaker/seeed-voicecard
cd seeed-voicecard
#for ReSpeaker 2-mic
sudo ./install.sh 2mic

#for ReSpeaker 4-mic
sudo ./install.sh 4mic

#reboot your Raspbian OS
reboot

Check that the sound card name matches the source code seeed-voicecard.

#for ReSpeaker 2-mic
pi@raspberrypi:~/seeed-voicecard $ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: ALSA [bcm2835 ALSA], device 0: bcm2835 ALSA [bcm2835 ALSA]
  Subdevices: 8/8
  Subdevice #0: subdevice #0
  Subdevice #1: subdevice #1
  Subdevice #2: subdevice #2
  Subdevice #3: subdevice #3
  Subdevice #4: subdevice #4
  Subdevice #5: subdevice #5
  Subdevice #6: subdevice #6
  Subdevice #7: subdevice #7
card 0: ALSA [bcm2835 ALSA], device 1: bcm2835 ALSA [bcm2835 IEC958/HDMI]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: seeed2micvoicec [seeed-2mic-voicecard], device 0: bcm2835-i2s-wm8960-hifi wm8960-hifi-0 []
  Subdevices: 1/1
  Subdevice #0: subdevice #0
pi@raspberrypi:~/seeed-voicecard $ arecord -l
**** List of CAPTURE Hardware Devices ****
card 1: seeed2micvoicec [seeed-2mic-voicecard], device 0: bcm2835-i2s-wm8960-hifi wm8960-hifi-0 []
  Subdevices: 1/1
  Subdevice #0: subdevice #0
pi@raspberrypi:~/seeed-voicecard $

#for ReSpeaker 4-mic
pi@raspberrypi:~ $ arecord -L
null
    Discard all samples (playback) or generate zero samples (capture)
playback
capture
dmixed
array
ac108
default:CARD=seeed4micvoicec
    seeed-4mic-voicecard, 
    Default Audio Device
sysdefault:CARD=seeed4micvoicec
    seeed-4mic-voicecard, 
    Default Audio Device
dmix:CARD=seeed4micvoicec,DEV=0
    seeed-4mic-voicecard, 
    Direct sample mixing device
dsnoop:CARD=seeed4micvoicec,DEV=0
    seeed-4mic-voicecard, 
    Direct sample snooping device
hw:CARD=seeed4micvoicec,DEV=0
    seeed-4mic-voicecard, 
    Direct hardware device without any conversions
plughw:CARD=seeed4micvoicec,DEV=0
    seeed-4mic-voicecard, 
    Hardware device with all software conversions
pi@raspberrypi:~ $

If you want to change the alsa settings, You can use sudo alsactl --file=asound.state store to save it.

Test:

#for ReSpeaker 2-mic
#It will capture sound an playback on hw:1
arecord -f cd -Dhw:1 | aplay -Dhw:1

#for ReSpeaker 4-mic
#It will capture sound on AC108 and save as a.wav
arecord -Dac108 -f S32_LE -r 16000 -c 4 a.wav

uninstall seeed-voicecard

If you want to upgrade the driver , you need uninstall the driver first.

pi@raspberrypi:~/seeed-voicecard $ sudo ./uninstall.sh 4mic
delete dtoverlay=seeed-4mic-voicecard in /boot/config.txt
delete snd-soc-ac108 in /etc/modules
------------------------------------------------------
Please reboot your raspberry pi to apply all settings
Thank you!
------------------------------------------------------
pi@raspberrypi:~/seeed-voicecard $ sudo ./uninstall.sh 2mic
delete dtoverlay=seeed-2mic-voicecard in /boot/config.txt
remove seeed-2mic-voicecard.dtbo in /boot/overlays
remove snd-soc-wm8960.ko
delete snd-soc-wm8960 in /etc/modules
------------------------------------------------------
Please reboot your raspberry pi to apply all settings
Thank you!
------------------------------------------------------

with Google Assistant

if you run the assistant but the playback is speed up considerably, try to configure alsa:

sudo cp asound.conf /etc/asound.conf

If the alsa configuration doesn't solve the issue, try to use pulseaudio. See #4

Enjoy !

4.1 KiB Raw Blame History

seeed-voicecard

uninstall seeed-voicecard

with Google Assistant

4.1 KiB

Raw Blame History