63 lines
1.8 KiB
Markdown
63 lines
1.8 KiB
Markdown
#seeed-voicecard
|
|
|
|
Firstly, get an updated kernel 4.9 :
|
|
```
|
|
sudo apt update
|
|
sudo apt install raspberrypi-kernel-headers raspberrypi-kernel
|
|
```
|
|
|
|
Next, while the upstream wm8960 codec is not currently supported by current Pi kernel builds, upstream wm8960 has some bugs, we had fixed it. we must it build manually.
|
|
|
|
Get the seeed voice card source code.
|
|
```
|
|
git clone http://git.oschina.net/seeed-se/seeed-voicecard
|
|
cd seeed-voicecard
|
|
make all
|
|
```
|
|
|
|
Next, copy then voice card overlay to boot dir, then apply it.
|
|
```
|
|
sudo cp seeed-voicecard.dtbo /boot/overlays
|
|
```
|
|
Load the driver default.
|
|
```
|
|
echo 'wm8960' | sudo tee --append /etc/modules > /dev/null
|
|
```
|
|
Invoke usage by adding this to /boot/config.txt:
|
|
dtoverlay=seeed-voicecard
|
|
|
|
Check that the sound card name matches the source code seeed-voicecard.
|
|
|
|
```
|
|
pi@raspberrypi:~/seeed-voicecard$ aplay -l
|
|
**** List of PLAYBACK Hardware Devices ****
|
|
card 0: ALSA [bcm2835 ALSA], device 0: bcm2835 ALSA [bcm2835 ALSA]
|
|
Subdevices: 8/8
|
|
Subdevice #0: subdevice #0
|
|
Subdevice #1: subdevice #1
|
|
Subdevice #2: subdevice #2
|
|
Subdevice #3: subdevice #3
|
|
Subdevice #4: subdevice #4
|
|
Subdevice #5: subdevice #5
|
|
Subdevice #6: subdevice #6
|
|
Subdevice #7: subdevice #7
|
|
card 0: ALSA [bcm2835 ALSA], device 1: bcm2835 ALSA [bcm2835 IEC958/HDMI]
|
|
Subdevices: 1/1
|
|
Subdevice #0: subdevice #0
|
|
card 1: seeedvoicecard [seeed-voicecard], device 0: bcm2835-i2s-wm8960-hifi wm8960-hifi-0 []
|
|
Subdevices: 1/1
|
|
Subdevice #0: subdevice #0
|
|
pi@raspberrypi:~/seeed-voicecard$
|
|
```
|
|
Next apply the alsa controls setting
|
|
```
|
|
sudo alsactl --file=asound.state restore
|
|
```
|
|
If you want to change the alsa settings, You can use "sudo alsactl --file=asound.state store " to save it.
|
|
|
|
Test:
|
|
```
|
|
arecord -f cd -Dhw:1 | aplay -Dhw:1
|
|
|
|
```
|
|
Enjoy !
|