251 lines
No EOL
8.3 KiB
Markdown
251 lines
No EOL
8.3 KiB
Markdown
# PulseAudio Configuration for seeed-voicecard
|
|
|
|
Follow this guide if you want to use your seeed-voicecard as a default source/sink of pulseaudio.
|
|
|
|
### Prerequisites
|
|
|
|
1. Download PulseAudio
|
|
```
|
|
sudo apt install -y pulseaudio
|
|
```
|
|
|
|
2. PulseAudio Profiles
|
|
```
|
|
cd seeed-voicecard/pulseaudio
|
|
sudo cp pulse_config_4mic/seeed-voicecard.conf /usr/share/pulseaudio/alsa-mixer/profile-sets/seeed-voicecard-4mic.conf
|
|
sudo cp pulse_config_6mic/seeed-voicecard.conf /usr/share/pulseaudio/alsa-mixer/profile-sets/seeed-voicecard-8mic.conf
|
|
```
|
|
|
|
3. Add `udev` Rules
|
|
|
|
During the system start, when the card "seeed4micvoicec" is detected, the PULSE_PROFILE_SET variable will be set in the udev database, and PulseAudio will be forced to use `seeed-voicecard-4mic.conf`. Similarly, if the card "seeed8micvoicec" is detected, PulseAudio will be forced to use `seeed-voicecard-8mic.conf`.
|
|
|
|
```
|
|
sudo cp 91-seeedvoicecard.rules /etc/udev/rules.d/91-seeedvoicecard.rules
|
|
```
|
|
|
|
### ReSpeaker 4 Mic Array
|
|
|
|
<!--
|
|
1. Download pulseaudio
|
|
```
|
|
sudo apt install pulseaudio
|
|
```
|
|
|
|
2. First, you need to write [a profile for pulse](https://www.freedesktop.org/wiki/Software/PulseAudio/Backends/ALSA/Profiles/)
|
|
```
|
|
cd seeed-voicecard
|
|
cd pulseaudio
|
|
cd pulse_config_4mic
|
|
sudo cp seeed-voicecard.conf /usr/share/pulseaudio/alsa-mixer/profile-sets/
|
|
```
|
|
|
|
3. Edit `udev rules`
|
|
|
|
During the system start, when the card "seeed4micvoicec" is detected, the PULSE_PROFILE_SET variable will be set in the udev database, and PulseAudio will be forced to use `seeed-voicecard.conf`.
|
|
|
|
```
|
|
# have a look at /lib/udev/rules.d/90-pulseaudio.rules
|
|
sudo vim /lib/udev/rules.d/90-pulseaudio.rules
|
|
# add the following lines at about line 87(behind the setting for some laptops and before the line GOTO="pulseaudio_end")
|
|
# Seeed Voicecard
|
|
ATTR{id}=="seeed4micvoicec",ATTR{number}=="1",ENV{PULSE_PROFILE_SET}="seeed-voicecard.conf"
|
|
```
|
|
|
|
|
|
The value of `ATTR{number}` can be found with:
|
|
|
|
```
|
|
udevadm info -a -p /sys/class/sound/card0/
|
|
# or udevadm info -a -p /sys/class/sound/card1/
|
|
```
|
|
|
|
For example, in Raspberry Pi, we can find `ATTR{id}=="seeed4micvoicec"` and `ATTR{number}=="1"` with command `udevadm info -a -p /sys/class/sound/card1/`:
|
|
|
|
```
|
|
pi@raspberrypi:~ $ udevadm info -a -p /sys/class/sound/card1/
|
|
|
|
Udevadm info starts with the device specified by the devpath and then
|
|
walks up the chain of parent devices. It prints for every device
|
|
found, all possible attributes in the udev rules key format.
|
|
A rule to match, can be composed by the attributes of the device
|
|
and the attributes from one single parent device.
|
|
|
|
looking at device '/devices/platform/soc/soc:sound/sound/card1':
|
|
KERNEL=="card1"
|
|
SUBSYSTEM=="sound"
|
|
DRIVER==""
|
|
ATTR{id}=="seeed4micvoicec"
|
|
ATTR{number}=="1"
|
|
|
|
looking at parent device '/devices/platform/soc/soc:sound':
|
|
KERNELS=="soc:sound"
|
|
SUBSYSTEMS=="platform"
|
|
DRIVERS=="seeed-voicecard"
|
|
ATTRS{driver_override}=="(null)"
|
|
|
|
looking at parent device '/devices/platform/soc':
|
|
KERNELS=="soc"
|
|
SUBSYSTEMS=="platform"
|
|
DRIVERS==""
|
|
ATTRS{driver_override}=="(null)"
|
|
|
|
looking at parent device '/devices/platform':
|
|
KERNELS=="platform"
|
|
SUBSYSTEMS==""
|
|
DRIVERS==""
|
|
``` -->
|
|
|
|
1. config `default.pa` and `daemon.conf`
|
|
```
|
|
sudo cp pulse_config_4mic/default.pa /etc/pulse/
|
|
sudo cp pulse_config_4mic/daemon.conf /etc/pulse/
|
|
```
|
|
|
|
2. reboot raspberry pi and check
|
|
```
|
|
sudo reboot
|
|
pulseaudio --start # start pulse at first
|
|
pactl info # check the setting
|
|
|
|
Server String: /run/user/1000/pulse/native
|
|
Library Protocol Version: 32
|
|
Server Protocol Version: 32
|
|
Is Local: yes
|
|
Client Index: 18
|
|
Tile Size: 65496
|
|
User Name: pi
|
|
Host Name: raspberrypi
|
|
Server Name: pulseaudio
|
|
Server Version: 10.0
|
|
Default Sample Specification: s16le 4ch 96000Hz
|
|
Default Channel Map: front-left,front-center,front-right,rear-center
|
|
Default Sink: alsa_output.platform-soc_audio.analog-stereo
|
|
Default Source: alsa_input.platform-soc_sound.seeed-source
|
|
Cookie: 3b12:70b3
|
|
```
|
|
|
|
### 6-Mics Circular Array Kit and 4-Mics Linear Array
|
|
|
|
<!--
|
|
1. Download pulseaudio
|
|
```
|
|
sudo apt install pulseaudio
|
|
```
|
|
|
|
2. First, you need to write [a profile for pulse](https://www.freedesktop.org/wiki/Software/PulseAudio/Backends/ALSA/Profiles/)
|
|
```
|
|
cd seeed-voicecard
|
|
cd pulseaudio
|
|
cd pulse_config_6mic
|
|
sudo cp seeed-voicecard.conf /usr/share/pulseaudio/alsa-mixer/profile-sets/
|
|
```
|
|
|
|
3. Edit `udev rules`
|
|
|
|
During the system start, when the card "seeed8micvoicec" is detected, the PULSE_PROFILE_SET variable will be set in the udev database, and PulseAudio will be forced to use `seeed-voicecard.conf`.
|
|
|
|
```
|
|
# have a look at /lib/udev/rules.d/90-pulseaudio.rules
|
|
sudo vim /lib/udev/rules.d/90-pulseaudio.rules
|
|
# add the following lines at about line 87(behind the setting for some laptops and before the line GOTO="pulseaudio_end")
|
|
# Seeed Voicecard
|
|
ATTR{id}=="seeed8micvoicec",ATTR{number}=="1",ENV{PULSE_PROFILE_SET}="seeed-voicecard.conf"
|
|
```
|
|
|
|
|
|
The value of `ATTR{number}` can be found with:
|
|
|
|
```
|
|
udevadm info -a -p /sys/class/sound/card0/
|
|
# or udevadm info -a -p /sys/class/sound/card1/
|
|
```
|
|
|
|
For example, in Raspberry Pi, we can find `ATTR{id}=="seeed8micvoicec"` and `ATTR{number}=="1"` with command `udevadm info -a -p /sys/class/sound/card1/`:
|
|
|
|
```
|
|
pi@raspberrypi:~ $ udevadm info -a -p /sys/class/sound/card1/
|
|
|
|
Udevadm info starts with the device specified by the devpath and then
|
|
walks up the chain of parent devices. It prints for every device
|
|
found, all possible attributes in the udev rules key format.
|
|
A rule to match, can be composed by the attributes of the device
|
|
and the attributes from one single parent device.
|
|
|
|
looking at device '/devices/platform/soc/soc:sound/sound/card1':
|
|
KERNEL=="card1"
|
|
SUBSYSTEM=="sound"
|
|
DRIVER==""
|
|
ATTR{id}=="seeed8micvoicec"
|
|
ATTR{number}=="1"
|
|
|
|
looking at parent device '/devices/platform/soc/soc:sound':
|
|
KERNELS=="soc:sound"
|
|
SUBSYSTEMS=="platform"
|
|
DRIVERS=="seeed-voicecard"
|
|
ATTRS{driver_override}=="(null)"
|
|
|
|
looking at parent device '/devices/platform/soc':
|
|
KERNELS=="soc"
|
|
SUBSYSTEMS=="platform"
|
|
DRIVERS==""
|
|
ATTRS{driver_override}=="(null)"
|
|
|
|
looking at parent device '/devices/platform':
|
|
KERNELS=="platform"
|
|
SUBSYSTEMS==""
|
|
DRIVERS==""
|
|
``` -->
|
|
|
|
1. config `default.pa` and `daemon.conf`
|
|
```
|
|
sudo cp pulse_config_6mic/default.pa /etc/pulse/
|
|
sudo cp pulse_config_6mic/daemon.conf /etc/pulse/
|
|
```
|
|
|
|
2. reboot raspberry pi and check
|
|
```
|
|
sudo reboot
|
|
pulseaudio --start # start pulse at first
|
|
pactl info # check the setting
|
|
|
|
# The output should be like this
|
|
# You could see the default sink is seeed-2ch and default source is seeed-8ch
|
|
pi@raspberrypi:~ $ pactl info
|
|
Server String: /run/user/1000/pulse/native
|
|
Library Protocol Version: 32
|
|
Server Protocol Version: 32
|
|
Is Local: yes
|
|
Client Index: 6
|
|
Tile Size: 65496
|
|
User Name: pi
|
|
Host Name: raspberrypi
|
|
Server Name: pulseaudio
|
|
Server Version: 10.0
|
|
Default Sample Specification: s32le 8ch 96000Hz
|
|
Default Channel Map: front-left,front-left-of-center,front-center,front-right,front-right-of-center,rear-center,aux0,aux1
|
|
Default Sink: alsa_output.platform-soc_sound.seeed-2ch
|
|
Default Source: alsa_input.platform-soc_sound.seeed-8ch
|
|
Cookie: 3523:e5af
|
|
```
|
|
|
|
### FAQ
|
|
|
|
1. Default Sink/Source not right
|
|
|
|
Make sure there is no any other daemon or using the audio device. Then check profile and udev rules.
|
|
|
|
`pacmd list-sinks` and `pacmd list-sources` can be used to show the avaiable sinks/sources, after pulseaudio is started.
|
|
|
|
2. Can't start PulseAudio
|
|
|
|
Check `default.pa` and `daemon.conf`
|
|
|
|
3. How to get PulseAudio started automatically
|
|
|
|
Normally the PulseAudio server is started automatically. If you want to disable it, you can set `autospawn = no` in `~/.config/pulse/client.conf` or `/etc/pulse/client.conf`.
|
|
[Click this for more details](https://www.freedesktop.org/wiki/Software/PulseAudio/Documentation/User/Running/).
|
|
|
|
4. Why the default sample rate is 96000? What if my audio's sample rate is not the same as the default?
|
|
|
|
For the other sample rate audio, PulseAudio will resample it into 96K, which means that if your audio's sample rate is lower than 96K, it will get smoothing. |